There are always various problems in the use of train crane tubes, and deformation is one of them. As a professional manufacturer, we are obliged to provide technical guidance to our users.
1. Flange: The end of the train crane tube is convex to the inside or outside.
Round edge: a tube that is raised or grooved in the circumferential direction of the elbow.
2. Change the train crane pipe into elbows with different radii of curvature, such as elbows, elbows, etc.
3. Train crane pipe with elbow variable wall thickness means that the wall thickness changes along the length of the pipe.
4. For elbow pipe fittings with changed section, the circular section can be changed to square, oval, polygonal, etc. according to requirements.
5. Elbow variable-diameter pipe fittings means that the diameter of the pipe end or a certain part of the pipe is reduced; pipe fittings with crimping and bottom sealing, increasing the total strength of the pipe end to the outside or inside of the pipe, or sealing the end of the pipe Pipe fittings.
The deformation of the train crane tube is caused by a variety of factors. For different deformation phenomena, only understanding the causes can be solved.
