(1) Corresponding standard flanges are provided at the junction of the oil distributing platform and crane pipes, and the foundation flanges are ensured to be firm and reliable. The height of the flange plate from the ground is 2.1 to 2.2 meters. The height of the flange plate from the ground when the crane pipe is hoisted is 2.7 ~ 2.8 meters.
(2) The product has been tested for tightness when it leaves the factory. The user only needs to refer to the structural diagram when installing, first connect the horizontal short pipe with the foundation flange on the oil stand, then connect the horizontal short pipe with the lifting arm group, and finally install the balance , Connect the balancer rod.
(3) After the final assembly is completed, adjust the balancer, first raise the lifting arm to above 60° and unscrew the balance
The end cap of the device, adjust the screw so that the crane tube can stop within the range of -15°～60°.
The use and maintenance of automobile oiling crane pipe:
(1) When towing the crane tube, apply force evenly to avoid impact.
(2) After the work is completed, push the crane pipe to the side of the oil station, and push the crane pipe lifting arm to the 60° position, so that the balancer is in a relaxed state.
(3) The user should establish a sound maintenance system, regularly check the work of crane management, and do a good job of maintenance.
The model of the automobile oiling crane pipe is determined according to the nature of the loading and unloading medium. For highly volatile media, choose a closed loading and unloading crane pipe, and a strong acid and strong alkaline medium crane pipe. Corroded fluorine and other materials, etc.
